Need help?Do you have a question about the Aritech CS350 and is the answer not in the manual?
General| Brand | Aritech |
|---|---|
| Model | CS350 |
| Category | Control Panel |
| Language | English |
Overview of the CS350 control panel's capabilities and features.
Step-by-step guide for physically installing the CD3008 keypad.
Diagram illustrating the layout and components of the CD3008 keypad.
Configuration of DIP switches on the keypad for identification.
Details STAR and MULTIDROP wiring methods for connecting keypads to the panel.
Specifies the maximum total cable length allowed for wiring loops.
Steps for powering up the control panel and keypads correctly.
Outlines the main menu blocks and structure for programming the system.
Practical guide demonstrating how to add additional keypads to the system.
Visual overview of maintenance-related programming options.
Visual overview of timer-related programming options.
Visual overview of user management programming options.
Visual overview of zone configuration programming options.
Visual overview of output and remote configuration options.
Visual overview of miscellaneous programming options.
Detailed functions for system maintenance and diagnostics.
Detailed functions for setting entry, exit, and bell times.
Detailed functions for managing user codes and privileges.
Detailed functions for configuring zone types and attributes.
Explains attributes that define zone behavior and operation.
Detailed functions for configuring output types and remote devices.
Detailed functions for system-wide miscellaneous settings.
Explanation of the new Perimeter and Dialler eXtended programming option.
Wiring and programming example for the Peridiax feature.
Guide to characters programmable via the keypad for names.
Instructions for programming custom zone and user names.
Procedure to reset the panel to factory defaults without an engineer code.
Procedure to reset the panel to factory defaults using an engineer code.
Overview of End-of-Line (EOL) and dual zone wiring configurations.
Explains the principles of wiring alarm and tamper devices with resistors.
Diagram illustrating the wiring connections for Aritech sirens.
Details on setting the siren cut-off timer using jumpers.
Explanation of the operational principle of the system's outputs.
Diagram showing the wiring for the digital communicator.
Diagram illustrating the wiring for fire detectors.
A comprehensive list of short codes for quick access to programming options.
Instructions on how to use short codes for efficient system programming.
Default settings for zone types and their associated attributes.
Default settings for output types and user code privileges.
Default settings for timers and various other system options.
Troubleshooting steps for issues where bells do not ring during a test.
Steps to resolve problems with alarm zones failing to activate.
Steps to clear zone names from the display when attempting to arm.
Troubleshooting steps for zones that cannot be inhibited.
Solutions for bell fuses blowing when bells are sounding.
Addresses Personal Attack (PA) activation when the system is switched off.
Troubleshooting the 'No panel data' message on the keypad display.
Technical details on power input, consumption, and output voltage.
Specifications for signalling output types and programmable outputs.
Technical details on loop characteristics and battery backup requirements.
Comprehensive wiring diagram for the CS350 control panel.
To Next Page
