FP2000 SERIES ANALOGUE ADDRESSABLE FIRE PANEL: USER INSTRUCTIONS Version 3.1
2.4
SOUNDERS
SOUND
A red LED indicates that the sounders have been activated.
Depends on the operation mode of the panel. Please refer to your Installer to the
exact way of operation.
DELAY ON/OFF
The programmed Sounder Delay may be toggled ON or OFF. Two LED’s indicate
the state.
FAULT/DISABLE (Keyswitch
)
The Sounder Fault/Disable push-button allows the sounders to be disabled. The
associated LED indicates that the sounders have been disabled or that a sounder
fault is present.
The sounder fault can be:
• Sounder circuit open circuit
• Sounder circuit short circuit
• Sounder circuit fuse failure
SILENCE (Keyswitch
)
A yellow LED indicates that the sounders have been silenced.
Please refer to your Installer to the exact way of operation.
May 1997 Product Code: LKFP2403 Document No: 970528/205/M Page 7
To Next Page
Loading...
Need help?
General
