Aritech FP2000 Series User Manual

FP2000 SERIES ANALOGUE ADDRESSABLE FIRE PANEL: USER INSTRUCTIONS Version 3.1
KEYSWITCH:
/
A keyswitch is provided to either allow or prevent operation of the fire panel
controls. The Silence Buzzer and Test keys will operate with the keyswitch in any
position.
! Note: Level 1 for Disable and level 2 for Enable must not be confused with access
levels 1 and 2. There is no relation between the Enable/Disable keyswitch
and the allocated access levels.
2.6 OTHER
PANEL
Used by global and local repeaters for panel emulations. With a global repeater, the
Panel key is pressed, then the number of the panel to be emulated, and then the
Enter (
) key.
To stop emulation, the Panel key is pressed, then "0" and the Enter (
) key.
When a global repeater is emulating a panel it is not necessary to stop emulation
before emulating another panel. The global repeater will automatically stop the
emulation before trying to emulate another panel.
With a local repeater, pressing the Panel key will start emulation of the panel and if
the panel is already emulated, pressing the Panel key will stop emulation.
The yellow LED indicates whether a panel is emulated or not.
ALL
Used by the global repeater panel to send a command to all the panels that the
global repeater is communicating with. The yellow LED indicates that the key was
pressed, meaning that the following command button to be pressed will be sent to
all the relevant panels.
May 1997 Product Code: LKFP2403 Document No: 970528/205/M Page 9

Aritech FP2000 Series Specifications

General

Brand	Aritech
Model	FP2000 Series
Category	Fire Alarms
Language	English