Need help?Do you have a question about the Aritech 2X Series and is the answer not in the manual?
General| Certifications | EN54-2, EN54-4 |
|---|---|
| Power Supply | 230V AC, 50Hz |
| Battery Capacity | 7Ah |
| Current Consumption | Standby: 50mA |
| Humidity Range | Up to 95% RH, non-condensing |
Overview of the manual's purpose and related documentation.
Details control panel compatibility with firmware versions.
Legal disclaimer regarding product use and potential damages.
Explains warning, caution, and note messages used in the document.
Lists the available fire alarm, repeater, and evacuation panel models.
Explains network configuration for repeater panels.
Applies to panels with specific fire control features.
Lists compatible products and ensures system compatibility.
Introduces panel interface, controls, and indicators.
Describes the layout of the control panel interface.
Details additional controls for evacuation panels.
Describes options that may change interface button labels.
Explains operational features of front panel controls.
Information on shared controls and indicators across panel types.
Explains the meaning of icons shown on the control panel's LCD.
Describes how network and local events are displayed.
Explains the function of the control panel buzzer.
Summarizes system events logged as conditions.
Crucial safety precautions for electrical hazards during installation.
Details the physical layout of the control panel and its internal components.
Instructions on mounting the control panel cabinet.
Guidance on inserting custom panel interface labels.
Step-by-step guide for connecting the UI cable.
Procedures for printer setup and paper loading.
Information on recommended cables and connection practices.
Illustrates typical wiring diagrams for fire systems.
Guidelines for connecting loop devices and system wiring.
Details for connecting individual devices to the loops.
Instructions for wiring and configuring control panel inputs.
Instructions for wiring and configuring control panel outputs.
Essential procedures and safety for power connection.
Guidance on installing and connecting the panel batteries.
Instructions for adding expansion modules.
Steps to link multiple panels into a network.
How to connect external devices for data output.
Explains different access levels and their permissions.
Overview of PC-based configuration methods.
Tasks and settings available for maintenance users.
Panel configuration for date, time, and modes.
Setup for email notifications and USB device management.
How to enable or disable system features and devices.
Procedures for testing various system functions and devices.
How to identify device location using LED activation.
Activates mode to prevent accidental output changes during tests.
Accessing logs, revisions, and status reports.
Managing user passwords and accounts.
Comprehensive configuration for installers.
Settings for panel ID, description, network, and communications.
Setting the control panel's Firenet ID and description.
Setting the panel's regional operating mode.
Configuring the fire network topology and operation.
TCP/IP, email server, and other communication settings.
Configuration for auxiliary outputs, fault masks, and sounder behavior.
Adding and configuring installed expansion boards.
Loading custom screens, languages, or fonts.
Procedures for updating the control panel firmware.
Settings for internal and external printers.
Configuration for the DACT expansion board.
Configuring devices, zones, and I/O parameters.
Automatically configures installed loop devices.
Manually configuring loop devices.
Configuring zone settings like type, area, and delays.
Setting up confirmation areas for zones.
Configuring control panel inputs and outputs.
Configuring output groups for activation and status.
Setting delays for output groups and sounder behavior.
Configuring the loop wiring class (A or B).
Tools for troubleshooting and diagnostics.
Running tests for device diagnostics, output current, power supply, and loop values.
Managing user passwords and access levels.
Final checks and procedures before system operation.
Procedures for system inspections and cleaning.
Information on battery care, faults, and replacement.
Technical details on loop configuration and devices.
Electrical parameters for the power supply unit.
Technical details for batteries and charging system.
Technical details of the LCD display.
Specifications for Ethernet, TCP/IP, and USB ports.
Technical details on network connectivity.
Technical data for panel inputs and outputs.
Technical details of the internal printer.
Physical dimensions, weight, IP rating, and operating environment.
Lists the panel's default configuration settings.
Reference list of country codes for PSTN configuration.
Menu structure for fire alarm panels.
Menu structure for repeater panels.
Compliance with EN 54 standards.
Regulatory information for construction products.
Compliance with electrical safety and EMC standards.
To Next Page
