2X Series Installation Manual 129
Appendix D
Regulatory information
European standards for fire control and indicating equipment
These control panels have been designed in accordance with European EN 54-2,
and EN 54-4 standards.
In addition, they comply with the following EN 54-2 optional requirements.
Table 65: EN 54-2 optional requirements
Output to fire alarm devices [1]
Output to fire alarm routing equipment [2]
Alarm confirmation input from fire alarm routing equipment [2]
Output to fire protection equipment (type A, B, and C) [3]
Dependencies on more than one alarm signal (types A, B, and C) [4]
Total loss of the power supply
Output to fault warning routing equipment
Disablement of addressable points [4]
] Excluding repeaters and control panels operating in EN 54-2 Evacuation mode or NBN mode.
] Excluding repeaters, control panels without fire routing, and control panels with fire routing
] Excluding repeaters and control panels without fire protection controls.
To Next Page
Loading...
Need help?
General
