FP2000 SERIES ANALOGUE ADDRESSABLE FIRE PANEL: USER INSTRUCTIONS Version 3.1
4.6 RESTORE TO NORMAL
4.6.1 When the fire situation is under control, then the fire panel can be brought to a
normal condition by turning the keyswitch to
and pressing the RESET push-
button.
4.6.2 If a fire condition re-occurs, then one of the following exists:
• The fire is not under control - Refer to 4.2 above
• A Manual Call Point Glass is broken - Repair or isolate
• Detectors are contaminated with smoke - Clean detectors
4.6.3 Reset the fire panel as per 4.6.1.
Page 14 May 1997 Product Code: LKFP2403 Document No: 970528/205/M
To Next Page
Loading...
