FP2000 SERIES ANALOGUE ADDRESSABLE FIRE PANEL: USER INSTRUCTIONS Version 3.1
5. Replace with a new printer cartridge as follows:
Remove the paper roll. Put the right end of the cassette onto the axle on the printer
head, then the left end. If it is difficult to push the right end down, rotate the gear
slightly as indicated (see arrow on cassette cover). When the cassette clips into
place, check that the ribbon is straight. If not, rotate the gear.
6. Replace the front cover.
7. Remount the printer to the door ensuring the retaining screws are firmly tightened.
May 1997 Product Code: LKFP2403 Document No: 970508/205/M Page -A-3