AZI Sales/Customer Service 800-528-7411 or 602-470-1414 or support@azic.com Page 12 of 26
• OUTPUT TO USB DRIVE enables reporting to a USB drive. Make sure to insert the
USB drive in the USB Type A / Host port (marked USB) before printing the report.
When the desired report is printed, a file name is constructed from the instrument’s
serial number with a “.TXT” extension (for example “4000005.TXT”) and saved to the
USB drive. As reports are printed, they are appended to this file. Always wait 5
seconds after a report finishes prior to removing the USB drive to allow the instrument
to close the file. Otherwise USB drive corruption can occur. For best results use AZI
USB Flash Drives (AZI P/N: 990-0241) that have been validated for use with the
MAX
®
4000. Compatibility with non-AZI USB drives cannot be guaranteed.
• OUTPUT TO PRINTER enables reporting to the printer. Set this to Yes to enable
printing.
After making the proper selections, press [ESC] until back at the Main Menu to save the
changes.
4.7.2 Report Setup
To configure test report options, navigate:
[MENU]SETUP MENUREPORT
SETUP
This menu allows the reports to be
enabled and customized to your needs,
including what data and items are printed,
whether intermediate reports are sent
during a test, and whether or not to print
the graph.
See the manual for a complete explanation of the numerous options available related to
the reports.
After making the desired selections, press [ESC] until back at the Main Menu to save the
changes.
For immediate confirmation of successful printer setup, print a test result or calibration
report. For example, to print the Balance Calibration report:
o Begin at the Main Test screen and press [MENU], (the center soft key below the
display) to access the Main Menu.
o Select the CALIBRATION MENU item and press [ENT].
o Select the BALANCE CALIBRATION MENU item and press [ENT].
o Select the VIEW CALIBRATION REPORT item and press [ENT].
o Select the [PRINT] soft key and verify the report prints.
If you have any questions about connecting a printer or computer to your MAX
®
4000, call
AZI Customer Service.
To Next Page
Loading...
Need help?
General
