Arizona Instrument COMPUTRAC MAX 4000 Quick Guide

3. PACKING AND SHIPPING INSTRUCTIONS
IMPORTANT
Movement, handling, and packaging of the instrument must be done with
EXTREME CARE to avoid permanent, expensive internal damage. The MAX
®
4000
uses a delicate and very sensitive electronic force balance to measure small
weights and weight losses. The balance is capable of measuring weight to a
resolution of 0.1 milligrams. Careful handling is necessary to prevent damage to
the balance. With proper care, the instrument will provide years of dependable
service.
UNPACKING
• Unpack the instrument carefully and set it
down gently. Select a place where it will
be safe from bumping, jarring, excessive
air currents, and vibration.
• Check the instrument immediately for any
visible damage resulting from rough
handling during shipment.
• Retain the box and all packaging materials
for any future shipment of the instrument.
If the instrument is returned to AZI for any
reason, place it in the original packaging
materials. Only the original packaging
materials have been tested and proven
effective during shipment.
• Install the pan support:
o Open the lid by lifting the handle just
above the display.
o Remove the yellow tape, pan support
and packing foam.
o Save the foam so that it can be taped in place when the instrument is returned to
the factory for annual calibration.
o Gently but firmly install the pan support into the balance stem.
REPACKAGING FOR SHIPMENT
• Call AZI Customer Service for Return Material Authorization (RMA) information prior
to returning an instrument.
• Boxes and packing materials are available from AZI for all shipments.
• Pack the MAX
®
4000 in a Computrac
®
MAX
®
4000 shipping container, using the
packing diagram in the manual as a guide.
• Be sure to place the foam block underneath the pan support when packing the
instrument. See UNPACKING (above) for a picture and more information.
AZI WILL NOT BE RESPONSIBLE FOR SHIPPING DAMAGE.
IF YOU RETURN THE INSTRUMENT IMPROPERLY PACKAGED OR SHIPPED, YOU
SHOULD INSURE IT FOR FULL VALUE.

Arizona Instrument COMPUTRAC MAX 4000 Specifications

General

Brand	Arizona Instrument
Model	COMPUTRAC MAX 4000
Category	Measuring Instruments
Language	English