4
To Program Timer
By pressing the “TIMER” button you can scroll through all the
timer setting displays. There are a total of 10 timer settings
displayed 10 “ON” and 10 “OFF” settings.
This diagram will help to explain how to set the timer function.
ON
AUTO
-- --
:
I
AM MO
ON
AUTO
3 30
00
:
I
OFF
AUTO
-- --
:
I
PM TH
OFF
AUTO
6 30
00
:
I
Press the “TIMER” button,
the display should appear
as shown - This is the “ON”
setting for programs No. 1.
NOTE: One of the “ON -
OFF - AUTO” settings will
also appear at the bottom of
the display.
Press the “HOUR” “MIN” and
WEEK” buttons in turn to set
the time and day according
to when you want to set the
timer program on.
In the example opposite the
program 1 on time has been
set to 3.30AM Monday.
Press the “TIMER” button
again, and the display will
show the next programme
step which is the OFF time for
programe 1. (Corresponding
off to the on that was just set)
Use the “HOUR” “MIN” and
“WEEK buttons to set the OFF
time desired. In our example
on the left the off time for
programe 1 has been set to
6.30PM Thursday.
PC697 Instructions V6_2.indd 4 23/01/12 9:58 AM
To Next Page
Loading...
General