Arlo Essential - Restart the Camera from the Arlo App; View Device Information; Remove a Device from Your Account; Optional Smarthub and Base Station Settings

46Change Your Settings
Arlo Essential Series Wire-Free Camera
User Manual
5. Tap a setting.
Restart the camera from the Arlo app
Note: If you paired your camera to an optional SmartHub or base station, you can use the
Arlo app to restart the SmartHub or base station, but not the camera.
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select the camera.
4. Scroll down to the bottom of the page and tap Restart.
View device information
You can view the rmware version, hardware version, and the serial number.
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the device.
4. Tap Device Info.
Remove a device from your account
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the camera.
4. Scroll down and tap Remove Device.
Optional SmartHub and Base Station settings
You can pair your camera to an optional Arlo SmartHub model VMB5000 or VMB4540 or Base
Station with Siren model VMB4500 or VMB4000. The Arlo app lets you specify SmartHub or
base station settings.