24WiFi Setup and Connections
Pro 3 Floodlight Camera
User Manual
To move your oodlight’s WiFi connection directly to your router:
1. Open the Arlo app and log into the same Arlo account that your oodlight is connected to.
If you’re using an Arlo Smart trial associated with this account, doing this keeps the trial
active so you don’t lose it.
2. Make sure that your mobile device is connected to your router’s 2.4 GHz WiFi network.
For more information, see Connect your mobile device to a 2.4 GHz WiFi network during
setup on page 73.
3. Tap Settings > My Devices.
4. Select your oodlight.
5. Scroll down and tap Remove Device.
Your device is reset and removed from your account.
6. From My Devices, tap Add New Device > Cameras > Pro> Pro 3 Floodlight Camera.
7. If Arlo detects a SmartHub or base station, tap Connect without SmartHub or Connect
without a Base Station.
8. Follow the Arlo app instructions to connect your oodlight directly to a 2.4 GHz WiFi
network.
To Next Page
Loading...
