Arlo Pro 3 - Change Audio Sensitivity

37Modes, Rules, and Alerts
Pro 3 Floodlight Camera
User Manual
To set the light duration for a rule that doesn’t record video:
1. Open the Arlo app.
2. Tap Mode.
3. Tap the oodlight or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.
4. Tap Edit
next to the mode.
5. Tap Edit
next to the rule.
6. Under Then do the following, select Turn oodlight on.
7. Clear the Record Video check box.
8. An Edit
button appears next to Turn oodlight on, and the app displays the number of
seconds the oodlight will turn on (5 to 120 sec).
9. Tap Edit
and use the Duration slider to specify the number of seconds.
10. Tap Save.
Automatically stop recording when motion stops
1. Open the Arlo app.
2. Tap Mode.
3. Tap the oodlight or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.
4. Tap Edit
next to the mode.
5. Under Then do the following, tap Edit
next to Record video.
6. Select Record until activity stops (up to 300 sec).
Change audio sensitivity
1. Open the Arlo app.
2. Tap Mode.
3. Tap the oodlight or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.