17Get Started
Pro 4 Spotlight Camera
User Manual
To position your camera:
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select the camera.
4. Tap Device Utilities > Camera Positioning.
The camera starts streaming video. The signal strength bar indicates the WiFi signal that
your camera is receiving at its current location.
Test motion detection
You can use the motion detection test to nd the right motion sensitivity setting for your
camera.
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select your camera.
4. Tap Device Utilities > Motion Detection Test.
5. Move in front of the camera.
During this test, the LED blinks amber when motion is detected.
6. Move the slider to adjust the motion sensitivity level as needed.
This motion sensitivity setting is used during the motion detection test. It is not
automatically applied to the camera rules used by modes to arm your camera. When you
are satised with a particular motion sensitivity level in the test, note the setting so that
you can add it to your rules.
7. Edit the rule for your camera to enter the motion sensitivity level that you want to use. See
Change motion sensitivity on page 23.
Arm your camera
When your camera is armed it detects sound and motion. You can control when your camera
is armed using these features:
• Arm or disarm all your Arlo cameras and devices. See Arm or disarm all your Arlo devices on
page 35.
• Select a mode such as Armed, Disarmed, Schedule, or Geofencing. See Select a mode on
page 36.
To Next Page
Loading...
