Arlo Pro 4 - Install a Total Security Mount (sold separately)

13Get Started
Pro 4 Spotlight Camera
User Manual
5. Attach the camera to the outdoor mount and swivel to adjust the camera angle.
Install a Total Security Mount (sold separately)
1. Place the back plate against the wall, with the arrow pointing up, and secure it with
screws.
Note: If you are mounting your Total Security Mount on drywall, we recommend using the
included wall anchors.
2. Release the camera from the camera housing.
Press the button on the charging port underneath the camera. The camera clicks as it
disengages from the camera housing.
3. Pull the camera all the way out of the camera housing.
4. Insert your camera with its battery into the Total Security Mount housing.