Arlo Ultra 2 - Add a Rule with a Base Station Siren Trigger; Manage Alerts

47Modes, Rules, and Alerts
Ultra Series 4K UHD Wire-Free Security Camera System
User Manual
Add a rule with a base station siren trigger
Only cameras connected to a Base Station wtih Siren VMB4000 or VMB4500 can trigger the
siren.
Note: Arlo Ultra Cameras include a siren. For information about the camera siren, see Turn
the camera siren on and o on page 25.
To add a rule with a base station siren trigger:
1. Open the Arlo app.
2. Tap Mode.
3. Tap the base station.
4. Tap Edit
next to the mode.
5. Under Rules, select the camera.
6. Select the Turn Siren ON check box.
7. Tap Sound Alarm.
8. Move the sliders to the desired level for Siren Duration and Siren Loudness.
9. Tap Edit
next to the rule.
10. Tap Done.
Note: This rule isn’t active until you activate the mode to which you added the siren trigger.
Manage alerts
Arlo can push notications to your smartphone, send you email alerts, or do both. To receive
Arlo notications on your phone, you must install the Arlo app on your phone.
Note: If you log out of the Arlo app on your smartphone or mobile device, you will stop
receiving push notications.
1. Open the Arlo app.
2. Tap Mode.
3. Tap the SmartHub.
4. Tap Edit
next to the mode.