5Get Started
Eseential Spotlight Camera
User Manual
The Camera LED
The LED on the camera lights when the camera is powered on. The LED changes color and
blinks depending on the camera’s charge level and to indicate the status of activities such as
pairing the camera and updating the camera rmware.
• Slow blinking blue. The camera is in the process of pairing to a WiFi network.
• Fast blinking blue. The camera paired with a WiFi network.
• Blinking amber. The camera is out of range, a connection error occurred during pairing, or
the camera battery charge is low (15% or less).
• Alternating blue and amber. The camera failed to pair with the WiFi network, or a
rmware update is in process, or a reset is in process.
Wall mount your camera
Your camera comes with a mount and a screw kit.
1. Place the mount and secure it with screws.
If you’re mounting the camera on drywall, use
the drywall anchors we provide.
2. Attach the camera to the mount.
3. Tilt and swivel to adjust the camera angle.
To Next Page
Loading...
Need help?
General
