Need help?Do you have a question about the Armstrong 4300 Series and is the answer not in the manual?
General| Model | 4300 Series |
|---|---|
| Power Source | Electric |
| Shaft Seal | Mechanical seal |
| Type | Centrifugal |
| Operating Temperature | -20°F to 250°F |
| Voltage | 208-230V, 460V |
| Phase | 1 or 3 |
| Construction Material | Cast Iron |
| Impeller Material | Bronze |
| Applications | HVAC, Irrigation, Industrial |
Details temperature limits and precautions for operation.
Proper preparation to prevent rusting and maintain bearing function during storage.
Detailed lifting procedures for large Vertical In-Line units using motor lifting rings.
Advice on choosing the optimal installation site and ensuring adequate space.
Key considerations for pipe mounting and ensuring pump flexibility.
General principles for connecting piping to the pump, ensuring alignment and no strain.
Procedures for checking and verifying pump and motor shaft alignment.
Step-by-step guide for safely starting the pump and motor.
Information on mechanical seal operation, flushing, and potential weeping.
Details on pump shaft bushing lubrication and service.
Instructions for motor lubrication based on manufacturer recommendations.
Formal declaration of product compliance with relevant EU directives and standards.
To Next Page