EasyManua.ls Logo

Arnott C-2242 - User Manual

Default Icon
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
REV 3 12/04/2014
C-2242
C-2242
ARNOTT COIL SPRING CONVERSION KIT
FOR
1999-2006
MERCEDES-BENZ S-CLASS (W220 CHASSIS)
Arnott
®
is committed to the quality of its products. If you have a question or problem with any Arnott product,
please contact Arnott by calling 800-251-8993 during normal business hours or email techassistance@arnottinc.com.
WARNING:
The air suspension system is under pressure (up to 10 bar, or 150 lbf/in). Verify pressure has been relieved
and disconnect power to the air suspension system prior to disassembly. Do not allow dirt or grease to enter the system.
Always wear standard hand, ear, and eye protection when servicing the air suspension system.
KIT CONTAINS:
PARTS LIST
P/N QTY DESCRIPTION
21-4410 1 ARNOTT FRONT COIL SPRING CONVERSION
21-4401 1 ARNOTT REAR COIL SPRING CONVERSION
21-4634 1 ACCESSORY KIT
Congratulations on your purchase of an Arnott
®
air suspension product. We at Arnott Incorporated are proud
to offer a high quality product at the industry’s most competitive pricing. Thank you for your condence in us
and our product.
Proper installation is essential to experience and appreciate the benets of this system. Please take a moment
to review these installation instructions before you begin to install these components on your vehicle. The
removal and installation of air suspension products should only be performed by a fully qualied, ASE
Certied, professional.
It is equally important to be aware of all necessary safety measures while installing your new Air Suspension
System. This includes proper lifting and immobilizing of the vehicle and isolation of any stored energy to
prevent personal injury or property damage.
"Engineered to Ride, Built to Last
®
"
Question and Answer IconNeed help?

Do you have a question about the Arnott C-2242 and is the answer not in the manual?

Summary

Introduction and Safety Information

Welcome and Product Overview

Congratulates purchase, highlights quality, and emphasizes professional installation for benefits.

Kit Contents

Lists part numbers, quantities, and descriptions of the Arnott conversion kit components.

General Safety Precautions

Advises on vehicle lifting, pressure release, energy isolation, and protective gear use.

Front Suspension Conversion

Front Air Strut Removal Procedure

Details steps for removing the front air strut, including disconnection of components.

Front Coil Strut Installation Procedure

States that front coil strut installation is performed in the reverse order of removal.

Rear Suspension Conversion

Rear Air Strut Removal Procedure

Outlines steps for removing the rear air strut, including caliper and sensor handling.

Rear Coil Strut Installation Procedure

States that rear coil strut installation is performed in the reverse order of removal.

Electronic Bypass Module Installation

Module Identification and Wiring

Guides locating the control module, disconnecting connectors, and connecting the bypass module.

Module Power and Grounding

Details running the ground wire and installing the fuse holder for the bypass module.

Summary

Introduction and Safety Information

Welcome and Product Overview

Congratulates purchase, highlights quality, and emphasizes professional installation for benefits.

Kit Contents

Lists part numbers, quantities, and descriptions of the Arnott conversion kit components.

General Safety Precautions

Advises on vehicle lifting, pressure release, energy isolation, and protective gear use.

Front Suspension Conversion

Front Air Strut Removal Procedure

Details steps for removing the front air strut, including disconnection of components.

Front Coil Strut Installation Procedure

States that front coil strut installation is performed in the reverse order of removal.

Rear Suspension Conversion

Rear Air Strut Removal Procedure

Outlines steps for removing the rear air strut, including caliper and sensor handling.

Rear Coil Strut Installation Procedure

States that rear coil strut installation is performed in the reverse order of removal.

Electronic Bypass Module Installation

Module Identification and Wiring

Guides locating the control module, disconnecting connectors, and connecting the bypass module.

Module Power and Grounding

Details running the ground wire and installing the fuse holder for the bypass module.

Arnott C-2242 Specifications

General IconGeneral
BrandArnott
ModelC-2242
CategoryOther
LanguageEnglish

Related product manuals