Aroma360 Mini360 - Usage Tips and Maintenance; Proper Usage Tips; Diffuser Maintenance Procedures; Replacing the Nozzle

TIPS FOR PROPER USAGE
Get the most out of your Aroma360 experience
The Aroma360 diuser should be cleaned every 1-2 months to
ensure optimal performance. To clean the inner workings of
the device please follow these steps:
1 Fill the empty Aroma360 bottle that came with your diuser
with rubbing alcohol to the second line from the bottom.
2 Screw the alcohol filled bottle into the diuser.
3 Run the diuser for 15 minutes to ensure the alcohol can
filter through the whole device.
Unplug the device from the wall outlet and keep the diuser in
an upright position. Wipe the device with a damp cloth to
remove oil stains and fingerprints. Avoid using any harsh or
abrasive cleaning products.
1 To change the nozzle, unplug the diuser,
remove the bottle of oil and carefully pull
out the clear tube. Gently pull out the black
nozzle by wiggling it gently using a pair of
tweezers.
2 Replace it with a new nozzle and ensure
the nozzle is pressed very firmly into the top
of the diuser. The tube can be reinserted
into the nozzle.
The Aroma360 diuser should always be used in an upright
position. Do not tilt the diuser as oil can spill inside the
device and damage the mechanics.
Use of the Aroma360 diuser and aroma oils requires adult
supervision.
Do not wet the device or place it near any liquids, sinks,
bath tubs, or outdoors.
Do not use the device with any power cord other than the
one provided with your diuser. Position the power cord to
prevent it from being a tripping hazard.
Before connecting your Aroma360 diuser to a power
outlet, check that the voltage label specified on the adapter
is the same as the power supply.
Do not run the unit on empty. Unless there is oil in the
bottle or alcohol for cleaning, turn the device o.
Do not ingest any Aroma360 oils.
Do not apply any Aroma360 oils to any part of the skin.
Keep oils out of contact with eyes, ears, nose, mouth and
any other bodily opening. If contact does occur, flush with
water immediately until all traces of oil have been removed
entirely from the area.
SAFETY
To ensure safe usage, follow these precautions
*PRODUCTS MUST BE REGISTERED WITHIN FOURTEEN 
DAYS OF PURCHASE. FOR ALL TERMS AND CONDITIONS OF
PURCHASE & WARRANTY PLEASE VISIT AROMA.COM
It is very important that you put the tube into the correct opening of the nozzle
otherwise the unit will not diuse scent. Within the nozzle there is a small round
tube holder that the tube needs to be firmly secured into.
TIP: If you are having diiculty seeing the tube holder inside the nozzle, hold a
flashlight into the nozzle to increase visibility.
3. Insert the Aroma360 aroma oil of your choice, reconnect
both halves of the diuser and plug it into the wall outlet.
You’re ready to begin scenting!
The Mini360 comes with a
90-day limited warranty.*
PLEASE REGISTER
YOUR NEW AROMA PRODUCT AT
www.aroma360.com/pages/warranty
*Please note all Aroma360 diusers are specifically
designed to be used with Aroma360 oils. Using any other
oils will VOID the 90-day warranty.
•
•
•
•
•
•
•
•
•
•
•
•
MAINTENANCE
REPLACING THE NOZZLE
Avoid windows or air vents so the scent can circulate
through the surrounding area. Place the diuser in an
area on its own so the scent can flow freely.
Always position the diuser upright so the Aroma360 oil
can diuse upward into the air.
Your Aroma360 diuser will only work properly when
using Aroma360 oils. Use of any other oil is not
recommended and will void the warranty.
To preserve the motor of your Mini360, it is
recommended to run it for no more than 8 hours a day.