Aroma360 Mini360 - User Manual

Need help?

Do you have a question about the Aroma360 Mini360 and is the answer not in the manual?

Summary

Usage Tips and Maintenance

Proper Usage Tips

Guidelines for optimal scent circulation, diffuser placement, and oil usage to ensure the best experience.

Diffuser Maintenance Procedures

Instructions for cleaning the Aroma360 diffuser using rubbing alcohol to maintain optimal performance.

Replacing the Nozzle

Step-by-step guide on how to safely remove and replace the nozzle of the Aroma360 diffuser.

Setting Up the Aroma360 Diffuser

Diffuser Indicators and Controls

LED Color Key

Explanation of the different LED light colors indicating device status: powered on, scent diffusion, or remote control activity.

Remote Control Functions

Details on using the remote control for power, scent density adjustment, continuous diffusion, and interval settings.

Resetting the Remote Control

Procedure to reset the remote control to its factory settings, ensuring proper device communication.

The Aroma360 scent diffuser is a device designed to create a unique ambiance in any space through the advanced technology of Cold-Air Diffusion. It is described as a discreet and sleek solution for enhancing desired environments.

Function Description:

The Aroma360 diffuser operates by diffusing aroma oils into the air using Cold-Air Diffusion technology. Users can control the scent density and diffusion intervals to customize their scenting experience. The device is powered by an AC adapter and can be operated via a remote control.

Important Technical Specifications:

Motor Life: 3000 hours.
Power Supply: Requires a 110V power outlet.
Diffusion Technology: Cold-Air Diffusion.
Recommended Run Time: For the Mini360 model, it is recommended to run for no more than 8 hours a day to preserve the motor.
Warranty: The Mini360 comes with a 90-day limited warranty, which is voided if any oils other than Aroma360 oils are used. Products must be registered within fourteen (14) days of purchase for warranty to be valid.

Usage Features:

Setup:
1. Rotate the upper half of the diffuser counterclockwise while holding the bottom half to open it.
2. Remove the empty Aroma360 bottle (included for cleaning purposes) by turning it clockwise.
3. Screw the chosen Aroma360 scenting oil bottle counterclockwise into the diffuser, ensuring it is tight and parallel to the top half.
4. Close the unit by sliding the upper half back into place and turning clockwise.
5. Connect the power adapter to the diffuser's power port and plug it into a 110V power outlet, positioning the cord to prevent tripping hazards.
Placement: Avoid windows or air vents to allow scent to circulate freely. Place the diffuser in an area on its own. Always position the diffuser upright.
Oil Compatibility: The diffuser is designed to work properly only with Aroma360 oils. Using other oils is not recommended and will void the warranty.
LED Indicators:
- Blue LED Light: Indicates the device is powered on.
- Green LED Light: Indicates scent is being diffused.
- Red LED Light: Flashes when any button on the remote control is pressed.
Remote Control Functions:
- On/Off: Powers the device on and off.
- Density + (plus): Increases aroma density by 10% (up to 10 presses for maximum density).
- Density - (minus): Decreases aroma density by 10% (up to 10 presses for minimum density).
- Aroma: Causes the unit to work continuously.
- Scent Concentration (Blue Buttons): Adjusts scenting intervals.
  - 20%: Diffuses for 40 seconds, pauses for 160 seconds.
  - 35%: (Not explicitly detailed, but part of the range).
  - 50%: Diffuses for 100 seconds, pauses for 100 seconds.
  - 65%: (Not explicitly detailed, but part of the range).
  - 80%: (Not explicitly detailed, but part of the range).
  - 95%: Diffuses for 180 seconds, pauses for 10 seconds.
- Continuous Run Time (1h, 4h, 8h): Allows the diffuser to run continuously for a specified number of hours (1 hour, 4 hours, or 8 hours).
Remote Control Reset:
1. Unplug the diffuser from the power outlet.
2. Hold down the blue button labeled "35%" on the remote for 5 seconds while plugging the diffuser back into the wall outlet. A red light will flash on the diffuser.
3. Avoid pressing any buttons on the remote for 10 seconds to allow the receiver to reset.
Safety Precautions:
- Always use in an upright position; tilting can cause oil to spill and damage mechanics.
- Requires adult supervision.
- Do not wet the device or place it near liquids, sinks, bathtubs, or outdoors.
- Use only the provided power cord. Position the cord to prevent tripping.
- Verify voltage label on adapter matches power supply before connecting.
- Do not run the unit empty unless cleaning with alcohol; otherwise, turn it off.
- Do not ingest Aroma360 oils.
- Avoid skin contact with oils. Keep oils out of contact with eyes, ears, nose, mouth, and any other bodily opening. If contact occurs, flush immediately with water until all traces of oil are removed.

Maintenance Features:

Cleaning Frequency: The diffuser should be cleaned every 1-2 months for optimal performance.
Cleaning Procedure:
1. Fill the empty Aroma360 bottle with rubbing alcohol up to the second line from the bottom.
2. Screw the alcohol-filled bottle into the diffuser.
3. Run the diffuser for 15 minutes to allow alcohol to filter through the device.
4. Unplug the device, keep it upright, and wipe it with a damp cloth to remove oil stains and fingerprints.
5. Avoid harsh or abrasive cleaning products.
Replacing the Nozzle:
1. Unplug the diffuser, remove the oil bottle, and carefully pull out the clear tube.
2. Gently pull out the black nozzle by wiggling it with tweezers.
3. Replace with a new nozzle, ensuring it is pressed firmly into the top of the diffuser.
4. Reinsert the tube into the nozzle, making sure it is firmly secured into the small round tube holder inside the nozzle. (A flashlight can be used to aid visibility).