Aroma360 VanGogh360 - Adjusting Scent Intensity; Making Scent Stronger; Making Scent Weaker

How to Adjust the Scent Intensity
Aroma360
To reorder oils, visit www.Aroma360.com
CustomerService@Aroma360.com
561-206-0053
How to Make the Scent Stronger
How to Make the Scent Weaker
Press MODE 3 times and "SCENT, WORK,
PAUSE" will appear on the screen. The number on
the screen represents the scent intensity.
• 5 means the unit is working at 5% strength (it
will be scenting 5% of the time and paused for
95% of the time).
• 45 means it is working at 45% (it will be
scenting for 45% of the time and paused for
55% of the time).
To adjust the setting, press the up arrow so that the
scent intensity percentage increases.
The lowest intensity is 5% and it can be adjusted
all the way up to 95%.
You will need to adjust the scent for each of the
operating periods you have programmed. Press
MODE again and if no numbers appear, you do not
need to make any further adjustments. Otherwise,
continue with the below instructions to adjust the
intensity of the other operating periods.
Once you have made the adjustment, you can now
adjust the second operating period. To do so, press
MODE until "SCENT, WORK, PAUSE" is again on
the screen and do the same adjustment by
pressing the up arrow.
Once the second operating period is adjusted,
press it MODE 3 more times and do the same
adjustment.
A total of up to four adjustments will need to be
made.
Press MODE 3 times and "SCENT, WORK,
PAUSE" will appear on the screen. The number on
the screen represents the scent intensity.
• 5 means the unit is working at 5% strength
(it will be scenting 5% of the time and
paused for 95% of the time).
• 45 means it is working at 45% (it will be
scenting for 45% of the time and paused for
55% of the time).
To adjust the setting, press the down arrow so that
the scent intensity percentage decreases.
The lowest intensity is 5% and it can be adjusted
all the way up to 95%.
You will need to adjust the scent for each of the
operating periods you have programmed. Press
MODE again and if no numbers appear, you do not
need to make any further adjustments. Otherwise,
continue with the below instructions to adjust the
intensity of the other operating periods.
Once you have made the adjustment, you can now
adjust the second operating period. To do so, press
MODE until "SCENT, WORK, PAUSE" is again on
the screen and do the same adjustment by
pressing the down arrow.
Once the second operating period is adjusted,
press it MODE 3 more times and do the same
adjustment.
A total of up to four adjustments will need to be
made.