ARP 2600 - Important Dos and Donts; Study the Instruction Manual; Avoid Front Panel Calibration Adjustments; Do Not Open the Synthesizer

DO'S
AND
DON'TS
1 . DO
STUDY
THE
INSTRUCTION MANUAL
CAREFULLY
AND
OFTEN.
If
you
are
extremely
impatient
to
begin making
music with your
2600,
you can turn
directly
to
section 5
of the Manual.
Use
the
two
panel charts from the
Manual
as
guides.
But
only a careful study
-of
the
Instruction
Manual
will
show
you the
infinite possibilities for
sound
production
that
are contained
in
the 2600.
2.
DO NOT ATTEMPT
TO ADJUST
THE RECESSED
CALIBRATION
AND ALIGNMENT POINTS ON
THE
FRONT PANEL.
until
you
are
thoroughly
familiar with your
unit and
with
section
6
of the
Manual.
If you
have any
questions
about
calibration,
or
any
doubts about your ability to perform
the
alignment
procedure
without assistance, contact your Factory-Authorized
Service Center.
3. DO
NOT
t
UNDER ANY
CIRCUMSTANCES, OPEN UP THE
SYNTHESIZER OR IN ANY
WAY
MEDDLE WITH
ITS
INSIDES.
This will immediately void
your warranty.