Need help?Do you have a question about the ARP 2600 FS and is the answer not in the manual?
General| Type | Analog Synthesizer |
|---|---|
| Oscillators | 3 VCOs |
| Effects | Spring Reverb |
| Polyphony | Monophonic |
| Filter | 24 dB/oct low-pass filter |
| LFO | 1 LFO |
| Envelope Generators | 2 ADSR |
| Connectivity | MIDI In/Out/Thru |
Follow all instructions and heed warnings for safe operation of the apparatus.
Avoid water, use dry cloth, ensure ventilation, and connect to earthed mains.
Do not expose to rain or moisture; do not open the cabinet.
FCC regulations for digital devices and radio frequency energy.
Detailed description of the first Voltage Controlled Oscillator controls.
Detailed description of the second Voltage Controlled Oscillator controls.
Detailed description of the third Voltage Controlled Oscillator controls.
Detailed description of the Voltage Controlled Filter controls.
Detailed description of the ADSR Envelope Generator controls.
Detailed description of the AR Envelope Generator controls.
Detailed description of the Voltage Controlled Amplifier controls.
Illustration of typical connection setups for the ARP 2600 FS.
Steps for safely powering the ARP 2600 FS on and off.
Recommended initial control settings for basic sound output.
Guidance on adjusting the FINE TUNE slider for accurate pitch.
Solutions for power-on and no-sound issues.
To Next Page
