90
X
Whenever
you
need
a
reverberated signal
m
'
for
listening but for
further
processing,
take your
signal
from
the REV
out jack just under
the panel
box indicating the reverb
unit. This will
automatically
disconnect the right-channel reverb
output from
the
final output
stages
of the
2600.
Leave the left-channel reverb
output
level
control
all
the way
down for this particular
patch, and feed
VCOl directly
into
the
reverb input with
a
patch
cord.
In
situations
such as
this
one
the
reverb
unit
can
improve
enormously
the gong-like imitations
you
can get from
the
RM. But this is
a
little-explored
field and
you
are on your
own
here.
Of
course, you
are familial
with this.
Use
this section,
however, to
catalogue particular settings you
find useful, and to experiment
with
multiple waveforms and control
sources.
To Next Page
Loading...
