Array electronic AF-10MR-A

To Next Page

To Previous Page

hapter

Ⅳ

rogramming on

FAB

panel

Note:

The default password is 0001.

4.3 Function

The editing frame is shown in Fig4.4. The user can use

and keys to

move the arrow > on the left and press the OK key to conrm the selection of

functions, four types of which are:

Editor: The function for programming editing. Editing-function Selecting

Frame (shown in Fig. 4.5) will appear when this function is selected;

FAB/Rom: The function for reading programs, modifying an address etc.

Set: The function for the setups of RTC and password;

RUN: The function for the beginning of running a FAB program.

Fig 4.4

4.3.1 Editor

If this function key is selected, the FAB will enter the Editing Function Selecting

Frame as shown in Fig. 4.5. The user may use

and keys to move the ar-

row > on the left and press OK key to select the functions.

Edit PRG (or New Prg): Input a new function block (consult 4.3.1.1);

Insert FB: Insert a function block into the existing program (consult 4.3.1.2);

Delete FB: Delete a function block from the existing program (consult 4.3.1.3);

Clear PRG: Delete all program blocks

>Editor

FAB/Rom

et..

RUN

>Edit Prg

Insert FB

Dclcte FB

Clear Prg

>New Prg

Insert FB

Dclcte FB

Clear Prg

Fig.4.5 Editing-function selecting Frame

Array electronic AF-10MR-A - Page 53