Arriflex 16SR 3 Quick Guide, 4/99, Page 2
Safety Specifications
About This Quick Guide
In order to ensure optimal performance, it is essential that you acquaint yourself with this Quick Guide and
that you follow the operating instructions described herein. First time users must acquaint themselves with the
full 16SR 3 instruction manual. Even though all efforts have been made to ascertain the accuracy of this
Guide, changes and upgrades to the products described can result in different hardware or behavior. In
other words, technical data are subject to change without notice.
Best viewing and printing of the Acrobat (pdf) version of this Quick Guide can be achieved through the use
of the Acrobat Reader 3.0 or later. For best printing results, use a PostScript printer. The Acrobat Reader can
be downloaded for free from the Adobe web site at http://www.adobe.com.
Safety Specifications
• Use only original ARRI accessories and replacement parts!
• Clean optical surfaces only with an optical brush or a clean optical cloth! In cases of solid dirt, moisten an
optical cloth with pure alcohol (or brand-name lens cleaner).
• Do not use solvents when cleaning the film path!
• When adjusting the mirror shutter, turn the camera off and remove the on-board battery or the power
cable! Accidentally running the camera while adjusting the mirror shutter can cause great damage.
• 16SR 2 magazines as they come from the factory cannot be used for Super 16 or Timecode recording.
• Do not use HS magazines (high speed) on the standard camera, nor standard magazines on the HS
camera!
• Never blow air into the lens opening! The indicator needle on the light meter can be damaged.
• Do not unscrew any screws which are sealed with locking paint!
• When using polarizing filters, use only circularly polarizing filters not linearly polarizing filters, or the light
meter will give incorrect readings.
To Next Page
Loading...
