To Next PageTo Next Page
Need help?Do you have a question about the ARRI 435 and is the answer not in the manual?
General| Camera Type | 35mm Film Camera |
|---|---|
| Film Format | 35mm |
| Lens Mount | PL Mount |
| Frame Rates | 1 - 150 fps |
| Shutter | Rotating Mirror Shutter |
| Power | 24V DC |
| Movement Type | Pin-registered movement |
| Magazine Capacity | 400 ft and 1000 ft |
| Shutter Angle | 11.2° to 180° |
Provides contact details for Arriflex Corporation's East and West Coast offices for inquiries and parts orders.
Details the differences between the 435 and 435ES models, including the FEM module and accessory compatibility.
Outlines critical safety guidelines for camera operation, handling, and maintenance to prevent damage or injury.
Describes the eyepiece, focus adjustment, and lock mechanism for optimal viewing.
Details the NORM-PS/CCU switch, PROG button, LCD display, and Arriglow brightness.
Covers image rotation controls, the sliding door, ground glass, and the PL mount.
Explains tensioning plates, footage counter, magazine release latch and opening cover.
Details FEM, battery compartment, and various accessory receptacles (RS, ACC, CCU, BAT).
Covers the main power switch and overload lights indicating operational status.
Details operational frame rate range and mirror shutter angle adjustments for 435 and 435ES.
Specifies input voltage, output capacities, fuses, and operating temperature range.
Covers film transport mechanics, contrast filters, and lists electronic/other accessories.
Explains Red LED, ASY, END, BAT indicators and various LCD display codes like glows and blinks.
Describes shutter status lights for 435ES and general LCD display warnings indicating operational issues.
Discusses compatible magazines, speed limitations, and reverse operation warnings.
Step-by-step guide for loading unexposed film onto the feed shaft and through the magazine throat.
Instructions on how to open the magazine door by disengaging the safety catch and lock.
Step-by-step guide for loading film onto the take-up shaft and ensuring proper loop length.
Details on creating the film loop and ensuring the plastic core engages correctly with the take-up shaft.
Instructions on closing and locking the magazine door after film is loaded.
Guide on how to attach the loaded magazine to the camera using dovetail areas.
Instructions for pulling the film loop into the camera and positioning it in the upper loop area.
Details on aligning the film with the gate, closing the movement, and positioning the loop.
How to check film movement and adjust pitch for smooth operation.
Procedure for setting the Timecode Sensitivity number via the LCD display.
Steps to power on the ARRIFLEX 435 using the main power switch and observing initial indicators.
How to start, stop, and monitor the camera's running status using the RUN button and indicator light.
Guides on using the inching knob and PHASE button for precise film movement.
Instructions for choosing common frame rates like 24 fps using the NORM setting.
Guide for setting any speed from 1.000 to 150.00 fps using the PS/CCU setting.
Steps to set the camera to run in reverse, indicated by the 'R' symbol on the display.
How to view the current mirror shutter angle using the PHASE button and LCD display.
Procedure for electronically setting shutter angles on the 435ES model.
Steps to turn off the electronic shutter adjustment feature on the 435ES.
Detailed steps for manually adjusting the mirror shutter angle using the adjustment screw.
Information on timecode recording capabilities and availability at different frame rates.
Table listing Timecode Sensitivity (TCS) values for various Kodak film stock types.
Table listing Timecode Sensitivity (TCS) values for various Fuji film stock types.
