ARRI EB MAX 1.8 - Technical Data

English
- 21 -
5. Technical Data EB MAX 1.8
Mains supply
Supply Voltage : 90 - 130 V~ / 180 - 250 V~; 50/60 Hz 1, N, PE
Line Power : 2450 VA / 2600 VA (max.) L2.0014189
2600 VA / 2600 VA (max.) L2.0014190
Nominal Current : 25 - 19 A / 13 - 10 A (eff., max.) L2.0014189
25 - 20 A / 13 - 10 A (eff., max.) L2.0014190
Power Factor : cos ϕ ≈ 0.98
Lamp connection
Lamp Power : 575 W / 800 W / 1200 W / 1800 W constant control
In conjunction with suitable 800 W and 1800 W
lampheads compensation of electric losses on head to
ballast cables (max 100 m).
Power Regulation : In conjunction with suitable 1800 W lampheads
automatic recognition of lamp types HMI 1200 W and
1800 W.
Current Characteristic : square wave, ca. 300 or 1000 Hz in "High Speed"
mode
square wave, 75 Hz in "75 Hz" mode.
nearly square wave, 50 or 60 Hz in "50/60 Hz" mode.
Dimming : Range 50 - 100% of nominal lamp power
Starting : cold start and hot restrike
typical light ripple : typ. < 3%
Dimensions
width · height · depth : 200 · 156 · 355 mm
Weight : ca. 8 kg
Protective Rate : IP 21
Remote Control
According DMX-512
Channel 1 : Dimming, Address selectable.
Channel 2 : Device ON/OFF; Operation mode
Channel 3 : Output frequency
Connectors : XLR 5-pin
PIN 1 : Ground
PIN 2 : DMX -
PIN 3 : DMX +
PIN 4 : n.c.
PIN 5 : n.c.