9
A
Place your cable modem on its side, then press down
and pull on the baery cover locking tab to open the
baery compartment on the boom of the cable
modem.
Slide the terminal end of the baery (label side up)
into the baery compartment until it is fully seated in
place.
Replace the baery cover with the locking tab facing
upward, and then push the baery cover until it snaps
into place.
Note: The baery for the SBV3202 is sold separately.
Baery operation is optional. Skip the following steps
if you do not intend to use a baery.
Note: The baery may take up to 12 hours to reach a
full charge.