Storage
ALL SAFE...UNTIL NEXT TIME!
Regular Maintenance
Due to the Speed and Performance of your ARRMA vehicle we recommend following the maintenance guide
below:
• After every few runs check the gluing of the tire to the wheel, clean and re-glue where required.
• Frequently check the whole vehicle for loose or missing screws and ttings. Use thread lock on any
replacement screws that x into metal parts or threads.
• Remove the wheels occasionally and check behind the wheel mounting hex for debris that might have
been wrapped around the axles and is causing extra drag.
Frequently check rotating parts are free from any obstructions such as stones or grass that might restrict their
rotation which can lead to the over stress of the motor or speed controller.
After 10-15 runs remove the motor from the vehicle, Re-oil the motor shaft bushes with some bush / lightweight
oil, a couple of drops on both bushes will aid the speed and longevity of your motor.
The vehicles shock absorbers will wear quicker if used in dirty dusty conditions. Replace oil and seals as
required to keep good shock damping to maintain the performance and handling of your vehicle.
A well maintained vehicle will keep the strength and reliability expected from your ARRMA vehicle.
18
To Next Page
Loading...
