SAFETY INSTRUCTIONS FOR STAPLER
Tacker safety warnings
• Always assume that the tool contains fasteners. Careless handling
of the stapler can result in unexpected firing of fasteners and
personal injury.
• Do not point the tool towards yourself or anyone nearby.
Unexpected triggering will discharge the fastener causing an
injury.
• Do not actuate the tool unless the tool is placed firmly against the
workpiece. If the tool is not in contact with the workpiece, the
fastener may be deflected away from your target.
• Disconnect the tool from the power source when the fastener jams
in the tool. While removing a jammed fastener, the stapler may be
accidentally activated if it is plugged in.
• Use caution while removing a jammed fastener. The mechanism
may be under compression and the fastener may be forcefully
discharged while attempting to free a jammed condition.
NOTE This warning may be omitted for stapler/nailer that do not
utilize a stored potential energy to drive the fasteners.
• Do not use this stapler for fastening electrical cables. It is not
designed for electric cable installation and may damage the
insulation of electric cables thereby causing electric shock or fire
hazards.
109
V ...................... Volts
A ...................... Amperes
or d.c. ................. Direct Current
~ or a.c. ...................... Alternating Current
Always wear safety glasses
when operating the tool.
To avoid loss of hearing, always wear ear
protection when operating the tool.
Obey all safety messages that follow this
symbol to avoid possible injury or death.
Functional description
To reduce the risk of injury, user must
read the instruction manual
To Next Page
Loading...
