ARTERY AT32F407 Series Application Note

AT32 Printf Debug Demo
2019.08.05 1 Rev 1.0.2
www.arterytek.com
AN0015
Application Note
AT32 Printf Debug Demo
Introduction
It is common for the user to check the debug process information in the process of application code
debug. In most cases, this action can be done through the serial port debugging assistant.
However, it would be a headache for users to try to observe the testing process information when
the serial port assistant is not supported by the hardware.
To address the above concerns, this application note provides a complete set of example codes
describing how to output the debug process information, especially when the serial port debugging
assistant is not available.
Applicable products:
Part number
AT32F403xx
AT32F413xx
AT32F415xx
AT32F403Axx
AT32F407xx

ARTERY AT32F407 Series Specifications

General

Series	AT32F407
Core	ARM Cortex-M4
Maximum CPU frequency	240 MHz
GPIO Pins	Up to 80
ADC Channels	16
DAC Channels	2
Package Options	LQFP48, LQFP64, LQFP100, LQFP144
Communication interfaces	USB, USART, SPI, I2C, CAN
ADC	12-bit ADC
DAC	2 x 12-bit DAC
Operating Temperature	-40°C to 85°C