Artesis eMCM User Manual

User Manual
Artesis Motor Condition Monitoring Systems
eMCM (Motor Condition Monitoring with Energy Meter)
PS.01 KL.25 REV:00

Artesis eMCM Specifications

General

Brand	Artesis
Model	eMCM
Category	Measuring Instruments
Language	English

Summary

Introduction

1. Overview

eMCM is the device that combines current/voltage signal analysis technique and motor protection technique.

2. Features

Provides condition monitoring and energy measuring of the motor in one device.

Installation

1. Installation

Avoid high temperature or electrical field; consider environmental conditions.

2. Name

Identifies and labels the various terminals and ports on the eMCM device.

3. Components

Details the eMCM unit and its external Human-Machine Interface (HMI).

4. HMI

Describes the Human-Machine Interface features, dimensions, and installation.

eMCM Using

1. Communication Setup

User can connect to eMCM with serial (RS485) or LAN(TCP/IP).

2. First Use

Guides through calibration and commissioning steps for initial operation.

3. Diagnostic Function

Explains how to use diagnostic features and interpret alarms/warnings.

Appendices

1. Appendix 1: MCM Error, alarm and warning conditions

Lists and describes various error, alarm, and warning conditions the eMCM may encounter.

2. Appendix 2: Current and voltage sensor selection

Provides guidance on selecting appropriate current and voltage sensors for the eMCM.

3. Appendix 3: Connection Diagrams

Illustrates various connection diagrams for different motor types and voltage levels.

4. Appendix 4: HMI Menu settings and parameters

Details the HMI menu structure and the available settings and parameters for configuration.

5. Appendix 5: Flowcharts for Alarm Conditions

Presents flowcharts to help diagnose and troubleshoot alarm conditions.