artisan LCF-411-RS - SETTINGS CHANGE; Top Mounted Cabinets Settings

artisan
™
10
1) The ‘cut out’ or lower set point temperature can
be changed.
a) On all top mounted cabinets:
Press the Set button for 5 seconds.
The orange light will go to ‘Temp Set’.
Then the screen will display the temperature set-point.
Change this to the desired temperature using the up &
down arrows, and then press ‘Set’ again to confirm the
new set-point.
SETTINGS
CHANGE
RS617S, RS815, LCF411
AND LF311