Artsound MX-5006M - General Description; Features

MX-2406M / MX-5006M
4
2. General description.
3. Features
Six-zone mixing amplier 100V is provided with built-in multimedia source. Suited for all uses of a PA system in
schools, home ofces or shops.
• 4 inputs MIC, 2 inputs LINE, separate treble and bass
tuning per channel
• 6 zone outputs with separate volume control
• Built-in siren (2/4-tone) and alarm
• Built-in multimedia source with USB/SD/Bluetooth and
FM tuner sound output. Microphone recording function.
• 24V DC power input
• 48V phantom power for MIC1-4 with selector switch
• Optional selective calling console MIC-216 -
expandable to 6 units max
• 5 priority levels with the following order:
• EMC input (externally transmitted signal)
• ALARM trigger (built-in)
• TEL input/REMOTE MIC (MIC-216)
• CHIME (ringtone)
• MIC1 (with precedence over MIC2-4/LINE1-2)
• 70V/100V speaker output/4-16 Ohm speaker output
(monitor function)
When the Unit is in Use.
Caution.
When Installing the Unit.
An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in
the electrical installation of the building.
Due to product upgrades, while some of the features and specication in the user manual does not
match the actual functions, sorry for any inconvenience and thanks for your kind understanding!
• Never plug in nor remove the power supply plug with
wet hands, as doing so may cause electric shock.
• When unplugging the power supply cord, be sure to
grasp the power supply plug; never pull on the cord
itself. Operating the unit with a damaged power supply
cord may cause a re or electric shock.
• When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit with
the power cord connected to the outlet may cause
damage to the power cord, resulting in re or electric
shock. When removing the power cord, be sure to hold
its plug to pull.
• Do not block the ventilation slots in the unit’s cover.
Doing so may cause heat to build up inside the unit
and result in re.
• Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or
steam as doing otherwise may result in re or electric
shock.
• Do not place heavy objects on the unit as this may
cause it to fall or break which may result in personal
injury and/or property damage. In addition, the object
itself may fall off and cause injury and/or damage.
• Make sure that the volume control is set to minimum
position before power is switched on.
• Loud noise produced at high volume when power is
switched on can impair hearing.
• Do not operate the unit for an extended period of time
with the sound distorting. This is an indication of a
malfunction, which in turn can cause heat to generate
and result in a re.
• Contact your ArtSound dealer as to the cleaning. If
dust is allowed to accumulate in the unit over a long
period of time, a re or damage to the unit may result.
• If dust accumulates on the power supply plug or in the
wall AC outlet, a re may result. Clean it periodically.
In addition, insert the plug in the wall outlet securely.
• Switch off the power, and unplug the power supply
plug from the AC outlet for safety purposes when
cleaning or leaving the unit unused for 10 days or
more. Doing otherwise may cause a re or electric
shock.