Aruba AP22 User Manual

14 Aruba Instant On AP22 Access Point | Installation Guide
Contact Information
Copyright
© Copyright 2023 Hewlett Packard Enterprise Development LP
This product includes code licensed under certain open source licenses which require source compliance. The corresponding
source for these components is available upon request. This offer is valid to anyone in receipt of this information and shall
expire three years following the date of the final distribution of this product version by Hewlett Packard Enterprise Company.
To obtain such source code, please check if the code is available in the HPE Software Center at https://
myenterpriselicense.hpe.com/cwp-ui/software but, if not, send a written request for specific software version and product for
which you want the open source code. Along with the request, please send a check or money order in the amount of US $10.00
to:
Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America.
Warranty
For information regarding Instant On product warranties and support service, visit
https://www.arubainstanton.com/contact-support.
Main Site https://www.ArubaInstantOn.com
Support Site https://www.ArubaInstantOn.com/contact-support/
Aruba Instant On Community https://community.ArubaInstantOn.com

Aruba AP22 Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Frequency Bands	2.4 GHz, 5 GHz
Maximum Data Rate	1.775 Gbps
Antenna Type	Integrated
Ethernet Ports	1 x 1 Gbps
Power over Ethernet	802.3af
Mounting Options	Ceiling, Wall
Dimensions	160 mm x 160 mm x 37 mm
Interfaces/Ports	1 x RJ-45
PoE Power Consumption	12.3 W
Input Voltage	48 VDC (802.3af/at)
Operating Temperature	0°C to 40°C
Wireless Speed	1775 Mbps
MIMO Technology	2x2