Need help?Do you have a question about the Aruba AP-85 and is the answer not in the manual?
General| Model | AP-85 |
|---|---|
| Device Type | Wireless Access Point |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Wireless Standards | 802.11a/b/g |
| Power over Ethernet | 802.3af |
| Mounting | Wall, Ceiling |
| Operating Temperature | 0°C to 40°C |
| Antenna | Integrated |
Specifies the minimum ArubaOS version required for AP-85 Series compatibility.
Lists the components included with AP-85TX, AP-85FX, and AP-85LX models.
Guides on identifying environmental factors that affect RF signal strength and performance.
Explains the concept of radio line of sight and its importance for wireless bridge or mesh links.
Outlines the necessary network setup and Mobility Controller configuration before AP deployment.
Provides a list of items required before proceeding with the AP-85 installation.
Ensures APs can locate and connect to the Mobility Controller before physical installation.
Explains how to configure unique provisioning parameters for each AP on the Mobility Controller.
Covers the core steps involved in physically installing the AP-85 unit.
Details the procedures for mounting the AP-85 to various surfaces like walls and poles.
Details the process for weatherproofing and connecting RJ-45 terminated CAT 5E cables.
Provides instructions for connecting the DC and AC power cables to the AP-85 models.
Directs users to follow instructions provided with the Aruba outdoor rated antenna.
Explains how to verify AP power and network connectivity after installation using LEDs.
Describes how network configuration settings are managed via Mobility Controller or Web UI.
To Next Page
