Aruba AP-85 - Product Specifications; Mechanical Specifications; Electrical Specifications

Aruba AP-85 Outdoor Access Point Series | Installation Guide Product Specifications | 43
Appendix B
Product Specifications
Product Specifications
Mechanical (AP-85TX, AP-85FX, and AP-85LX)
z Device Dimensions (HxWxD):
 10.80” x 12.64” x 3.07”
 274 mm x 321 mm x 78 mm
z Device Weight: 7.40 lbs/3.36 kgs
z Device Weight with Mounting Plate: 9.65 lbs/4.38 kgs
z Device Weight with Mounting Plate and Mounting Bracket: 10.85 lbs/4.92 kgs
z IP68 (1 m depth for 8 hrs) under IEC 60529 NEMA type 4X
z Temperature:
 Operating: -30ºC to 55ºC (-22ºF to 131ºF)
 Storage: -40ºC to 70ºC (-40ºF to 158ºF)
z Relative Humidity: 0% to 95% non-condensing
z Altitude: 0-3000 m (0-9850 ft)
z Survival Wind Speed: 125 mph (201 km/hr)
z Mounting:
 Articulating adjustable pole or mast mount kit (included)
 Antenna mount bracket (optional)
z Antenna: Quad, N-type Female interfaces for external antenna support
z Ground: Electrical safety/ground terminal point
z Visual Status Indicators (LEDs):
 Onboard LED array for RSSI level reading
 PWR - Power/Status
 LINK/ACT - LAN/Network Link Status
 RADIO 0 - Radio 0 Status
 RADIO 1 - Radio 1 Status
 RSSI (Radio 0) - RSSI Level for Radio 0
 RSSI (Radio 1) - RSSI Level for Radio 1
Electrical
AP-85TX
z 1 x 10/100 Base-T auto-sensing Ethernet (RJ-45) Interface
 IEEE 802.3 BaseT and 802.3u 100BaseTX compliant
 PoE 48V DC Power over Ethernet (IEEE 802.3af compliant)
 Serial over Ethernet (SoE)