Aruba AP-635 User Manual (English)

To Next Page

Aruba 630 Series Campus Access Points

Installation Guide

Rev05 | October 2021 1

The tri-radio Aruba 630 Series access points support the IEEE 802.11ax WLAN standard in the 6GHz band (Wi-Fi

6E) as well as the 5GHz and 2.4GHz bands, delivering high performance and capacity with MIMO (Multiple-Input,

Multiple-Output) and OFDMA (Orthogonal Frequency Division Multiple Access) technologies, while also

supporting IEEE 802.11a/b/g/n/ac wireless services.

Package Contents

 Aruba 630 Series Campus Access Point (with a pre-installed mount bracket)

Hardware Overview

The following sections outline the hardware components of the 630 Series access points.

Figure 1 AP-635 Front View

LEDs

The LED displays located on the front panel of the access point indicate the following functions:

System Status LED

The System Status LED indicates the operating condition of the access point, See Table 1.

The AP mount bracket attaches to a variety of mount kits (sold separately).

Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including

the original packing materials. Use these materials to repack and return the unit to the supplier if needed.

GHz

Need help?

Do you have a question about the Aruba AP-635 and is the answer not in the manual?

Aruba AP-635 Specifications

General

Frequency Bands	2.4 GHz, 5 GHz, 6 GHz
MIMO	4x4:4
Operating Temperature	0°C to 50°C (32°F to 122°F)
Bluetooth	Bluetooth 5.0
Power over Ethernet (PoE)	802.3at
Antenna Type	Integrated Omni-Directional Antennas
Mounting	Wall, Ceiling
Wi-Fi Standards	802.11ax (Wi-Fi 6), 802.11a/b/g/n/ac
Ethernet Ports	1x 2.5G Multi-Gigabit Ethernet (RJ-45)
Dimensions	220mm x 220mm x 48mm (8.7" x 8.7" x 1.9")