8 Aruba Instant On AP15 Access Point | Installation Guide
Figure 10 Completed Installation
Verifying Post-Installation Connectivity
The integrated LED on the access point can be used to verify that the access point access point is receiving power
and initializing successfully (see Table 1).
Mobile Application Installation
Search for “Aruba Instant On” app within the Apple App Store or Google Play to download and install the Aruba
Instant On mobile app to your phone. Launch the app and follow the instructions to complete the setup. For
more details, please refer to the User Guide.
Log in to Instant On Portal
Alternately, you can set up the Aruba Instant On access point from a web browser. Open a web browser and
enter https://portal.ArubaInstantOn.com in the address bar to access the Aruba Instant On portal login screen.
In the login screen, enter your Instant On account credentials to access your site.
Access points are radio transmission devices and are subject to governmental regulation. Network
administrators responsible for the configuration and operation of access points must comply with local
broadcast regulations. Specifically, access points must use channel assignments appropriate to the location in
which the access point is used.
To Next Page
Loading...
Need help?
General
