ARY VACMASTER VP321 - Setup and Initial Use; Adding Oil to Vacuum Pump

Congratulations on your purchase of the
VacMaster
®
VP321 Chamber Machine!
Thank you for purchasing the VacMaster
®
VP321 Chamber Machine. The
VP321 is designed as a commercial grade vacuum packaging system
and can be used for a wide variety of products. With the VP321 you can
extend food life, maintain food quality, reduce freezer burn and reduce
food waste and costs.
The VacMaster
®
VP321 is a chamber vacuum system, which offers two
distinct advantages over non-chamber, external bag type units. First, a
much higher level of vacuum can be achieved which means a longer shelf
life for foods that you package. Secondly, liquids and liquid-rich foods
can be effectively vacuum packaged. Food products like fresh meats,
sh, soups, stews, etc. are no longer a problem to vacuum package.
Marinated vegetables and meats are packaged quickly with ease, and no
mess.
The VP321 Chamber Machine uses commercial technology. Simply
place the pouch to be sealed inside the chamber and close the lid. This
activates the vacuum pump and the vacuum and sealing process begins!
First, the air is removed from the entire chamber and the vacuum pouch.
Once the preset vacuum level is achieved, the pouch is sealed. Upon
completion of the sealing cycle, the air ows back into the chamber and
the lid opens automatically.
Use the VP321 to:
• Vacuum package soups, stews and other liquid foods.
• Keep sh and game meat fresh longer and free of freezer burn.
• Store meat and sh scent-free.
• Take advantage of bulk buys. Simply portion and package.
• Perfect for marinating meat and vegetables.
• Vacuum package pre-made meals.
• Prevent oxidation and damage to rare coins, silverware and important
documents.
Read and follow all directions for usage and maintenance carefully
and you’ll benet from years of trouble-free and cost effective vacuum
packaging.
Call us at 800.821.7849 for questions regarding the machines or
vacuum pouches.
STOP!!
Read and complete the following to prevent any damage.
Oil must be added to the vacuum pump before using.
VacMaster
®
model VP321 uses an oil vacuum pump.
For shipping purposes there is no oil in the pump. Oil must be added.
Adding Oil to Vacuum Pump
Turn off and unplug machine to prevent electrocution.
1. Using the included ARY approved oil, ll the enclosed plastic oil bottle.
2. With a phillips screwdriver, remove the 4 screws to open the back of the
cabinet.
3. Locate the oil ll bolt on the top of the vacuum pump.
4. Remove oil ll bolt.
5. Watching site glass, insert end of oil bottle into hole.
6. Fill oil level between 1/2 to 3/4 of site glass.
Do not overll. Overll can cause damage to the vacuum pump.
7. Replace and tighten bolt to vacuum pump.
8. Reattach back cover.
NOTE: Pump requires approximately 8 uid ounces of oil (approx. 1 cup).
Use only approved VacMaster
®
vacuum oil.
Back of Housing Cabinet
Oil Fill
Oil Site Glass