Safety Precautions
For your safety, follow these precautions when using your
VacMaster
®
VP321:
▪ Read Operator’s Guide carefully before using the machine for
the rst time.
▪ Do not use the VP321 on wet or hot surfaces, or near a heat source.
▪ Do not immerse machine or power cord in water or any other liquid.
▪ Plug VP321 into grounded power sources only.
Do not use extension cord.
▪ To disconnect, unplug directly from power source. Do not disconnect
by pulling cord.
▪ Do not operate machine with damaged power cord.
▪ Only use VacMaster
®
vacuum pouches and accessories.
▪ Do not allow to be used as a toy. Close supervision is necessary
when used by or near children.
▪ Only use VP321 for its intended use.
Features of VP321
Power Switch
Control Panel
*Filler Plate
Seal Bars
*Lid Lock
Silicone Bar
*Lid Lock Feature: not to be used during the vacuuming cycle. Used to keep lid closed
when machine is not in use or while machine is in storage.
*Filler Plates: used to “take up space” in the vacuum chamber. Using the plates will result
in a faster vacuum time since there is less air to be removed from chamber. Can also be
used to keep product centered on the seal bar and preventing liquids from escaping.
To Next Page
Loading...
