To Next PageTo Next Page
Need help?Do you have a question about the Arzel Zone Control 200 Series and is the answer not in the manual?
Lists critical safety warnings before making connections to prevent electrical shock or damage.
Details cautious steps for system installation, handling, and environmental considerations.
Explains system operation when thermostats are satisfied and the MPS switch function.
Details thermostat compatibility and optimal settings for the zoning system.
States the system does not monitor ductwork air temperature for positive control.
Outlines the main steps for installing the zoning system, including dampers and wiring.
Illustrates the wiring connections for a Furnace/AC system with the zoning panel.
Presents wiring diagrams for heat pump systems, including electric backup.
Details the power switch, LED, and 24VAC transformer connection points.
Explains the dry-contact relays for HVAC equipment control signals.
Specifies how to connect thermostat wires to the control panel.
Describes the use of ODT terminals for emergency heat in dual fuel systems.
Steps to verify proper fan operation and damper positioning during the fan check-out.
Guides for checking heating and cooling circuits, pump operation, and damper response.
Instructions for applying the template and cutting the duct for damper installation.
Steps for inserting the damper and twisting it into the correct position.
Guidance on securing the damper with screws and attaching the air line.
Information on how to register the zoning system for a limited lifetime warranty.
Steps for diagnosing failed parts, obtaining an RMA, and shipping warranty claims.
Information on adding Fresh Air Control capabilities to zoning panels.
Details on viewing marketing, technical literature, and webinars online.
Instructions and QR code for registering the Arzel zoning system for lifetime warranty.
General| Brand | Arzel |
|---|---|
| Model | Zone Control 200 Series |
| Category | Control Panel |
| Language | English |
