15
Component Action Maintenance interval
Before
and after
each use
Annually
or every
50 h
Label Condition of the labels. ■ ▲
Engine
See operating instructions of the engine
manufacturer.
■ ▲
Check oil level (see operating instructions of the
engine).
■ ▲
Oil change. ▲
Flammable
material
Remove easily flammable debris buildup from the
engine and the device.
■ ▲
Tires Check tires and tire pressure if necessary. ■ ▲
■
□
▲
By the user when the engine is not running.
By the user when the engine is running.
By the authorised service centre.
Preparations
Prior to all maintenance and cleaning
work:
1. Let the device cool down for at least
20 minutes.
2. Pull off the spark plug connector.
3. Close the fuel valve.
4. For work on the bottom of the device, tilt
the device to the silencer side.
Cleaning the device
After each use, you should clean the device
thoroughly, especially the bottom side and
the blade.
Stuck grass or dirt affect the grass discharge
and the cutting quality. For a sufficient engine
To Next Page
Loading...
Need help?
General
