9
NOTE: If a Bluetooth device is disconnected due
to the power being turned off or if the device
is disconnected inadvertently, the unit will
automatically search for the matching BT mobile
phone when the power is restored.
Bluetooth Device Name Change
Press and hold the Bluetooth button (2) and TV
Button (5) simultaneously for 3 seconds, two
audible “Beep” sounds and BTWP2 border light
flash� After the audible prompt of the current
source mode, it indicates the Bluetooth device
name has been changed successfully�
• One “Beep” sound: The Bluetooth device name
will be changed to “Bluetooth RV 1”�
• Two “Beep” sound: The Bluetooth device name
will be changed to “Bluetooth RV 2”�
• Three “Beep” sound: The Bluetooth device
name will be changed to “Bluetooth RV 3” �
TV AUDIO OPERATION
Connect a TV connection cable from JENSEN TV
with ARC functionality to BTWP2 wall plate� If the
set up and operation is correct, the TV audio will
come out from the speaker of the head unit after
switching to TV Audio mode�
TV Audio Mode
Press the TV button (5) to select TV Audio mode,
unit will audibly prompt “TV Audio”�
TV Audio Mute
During TV audio playback, press the TV button (5)
to mute the audio output in TV audio mode�The
BTWP2 will audibly prompt “TV Audio Mute” and
the border light (6) illumination will blink� Press
the TV button (5) again to restore the TV audio, the
BTWP2 will audibly prompt “TV Audio Play”�
To Next Page
Loading...