EasyManua.ls Logo

ASA Electronics BTWP2 - Installation

ASA Electronics BTWP2
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
A B
Packing List
• BTWP2
INSTALLATION
It’s a good idea to read all of the instructions
before beginning the installation� We recommend
having your wall plate installed by a reputable RV
dealership�
Tools and Supplies
You will need these tools and supplies to install
your BTWP2:
• Phillips screwdriver
• Wire cutters and strippers
• Tools to remove existing radio (screwdriver,
socket wrench set or other tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 16 -18 gauge wire for power connections
• 20 gauge speaker wire
• Four M3x20mm (3/32 x 0�75") screws