Asante AsanteTalk - Chapter 3 Frequently Asked Questions; Asanté Talk Power-Up Sequence

Installation Process
Page 1-13
AsantéTalk Power-Up
AsantéTalk takes approximately 15 seconds to come up on a network. It
automatically detects the presence of LocalTalk devices and registers
them as nodes on Ethernet.
Once the AsantéTalk is active on the Ethernet network, any LocalTalk
nodes that are connected to the LocalTalk segment of the network will
appear within the Apple Macintosh Chooser. Those nodes will be able
to utilize server or printer resources on either ethernet or LocalTalk net-
works.
AsantéTalk LED’s
The four (4) LED’s (Light Emitting Diodes) on the AsantéTalk indicate
activity on the Ethernet and LocalTalk networks. The LED’s are as
follows:
Table 1:
LED Name Purpose
PWR Power
TX Transmit
RX Receive
LI Link Integrity