EasyManua.ls Logo

ASBER AEPO-24 - Manufacturers Identification Label Description; Installation and Assembly

ASBER AEPO-24
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
2.2 Manufacturer’s identification label description
Information on this plate includes the model, serial number, BTU / hour input of the burners operating gas
pressure in inches WC, and whether the appliance is orifices for natural or propane gas.
When communicating with factory about a unit or requesting for special parts or information,
Rating plate data is essential for proper identification.
ASBER COOKING APPLIANCES MUST BE CONNECTED ONLY TO THE TYPE OF GAS IDENTIFIED ON
THE RATING PLATE
2.3 Installation and assembly
SHIPPING DAMAGE CLAIM PROCEDURE
The equipment is inspected and crated by skilled personnel before leaving our factory. The transportation
company assumes full responsibility for safe delivery upon acceptance of this equipment. If shipment arrives
damaged:
Visible loss or damage: Note on freight bill or express delivery and signed by person making delivery.
File claim for damages immediately: Regardless of extent of damages.
Concealed loss or damage: If damage is noticed after unpacking, notify Transportation Company
immediately and file “Concealed Damage “claim with them. This should be done within (15) days from
date of delivery made to you. Retain container for inspection.
Model
Gas Type
Serial Number

Related product manuals