How to fix Ascend Group GPS unit that will not turn on?
If your Ascend Group GPS unit isn't turning on, it could be due to a couple of reasons. First, the wiring may not be connected properly; check and make sure the wiring connection is in order. Second, the battery might need charging; try recharging the battery.
What to do if Ascend Group GPS unit will not respond to SMS?
If your Ascend Group GPS unit isn't responding to SMS commands, there could be several reasons: * The GSM antenna might not be properly installed; ensure the GTLT2 is connected to the GSM network and that the GSM antenna is correctly connected to the GSM interface. * The GSM network might be experiencing slowdowns during peak hours or due to equipment issues. * The unit might be in sleeping mode; cancel sleeping mode. * There might be an issue with the SMS itself, such as an incorrect password or format; ensure you're using the correct password and SMS format. * The SIM card in the GTLT2 might have run out of credit; replace or top up the SIM card. * There might be no SIM card inserted; insert a working SIM card and verify it can send SMS messages using a phone. * The SIM ca...
Lists all included components for the GPS tracker installation.
Important safety and preparation steps before installing the device.
Step-by-step guide for installing the GPS tracker unit.
Explains the electrical connections and wiring diagram for the device.
Details the status indications provided by the device's LED lights.
Command to activate GPRS data transmission for tracking.
Configuration of Access Point Name for GPRS network connection.
Configures the server IP address and port for data transmission.
Sets timed data uploads when the vehicle is in motion.
Sets timed data uploads when the vehicle is stationary.
Guide to accessing and using the 900D web-based tracking platform.
General| Brand | Ascend Group |
|---|---|
| Model | GTLT2 |
| Category | GPS |
| Language | English |
To Next Page